6.Autoboot ( ESC O program name )
This command defines an autoboot program name in the MR350MKII. The autoboot program will be executed automatically each time the power is turned OFF and ON.
7.Password ( ESC P password )
To create or edit a supervisor password.
8.Get RAM size (ESC G)
Get the MR350MKII total RAM size, program execution memory, and free memory which available for RAM disc.
Get Flash ROM size (ESC G/ROM)
Get the MR350MKII total Flash ROM size and free memory which available for RAM disc.
9.Get filename of current executing program (ESC I filename)
While the <ESC I> command is received by MR350MKII, the system will response the current executing program name or no program is running.
10.Check file existed and files size(ESC J filename)
Check if the file is existed on MR350MKII or not. If file is exist, it will return its size
11.Set keyboard locking (ESC K state)
Set the MR350MKII ? keyboard locking state. There are three states allowed to be assigned: UNLOCK, LOCK, or PARTIAL LOCK.
12.Change terminal address ID (ESC 5 ID)
Assign a new terminal address ID to the terminal. Once the terminal address ID is changed, it will take effect immediately without having to reset the terminal.
13.Disable UPS battery (ESC F)
In general, UPS battery can supply power to MR350MKII when disconnect power adapter or power failure. User can use this command to disable UPS battery after power failure.
14.Loopback test (ESC 9)
The loopback test is used for testing the line communication. The testing program run on host sends this command with test data to terminal and terminal echoes back the data to be verified by the program.
