Unitech MR350MKII manual General Control Commands

	2B		Set System date	3-50
	2C		Get System clock	3-50
	2D		Set System clock	3-51
	3.9.	File Manager		3-51
	3C		Create or truncate file	3-51
	3D		Open file	3-52
	3E		Close file	3-52
	3F		Read file	3-53
	40		Write file	3-53
	41		Delete file	3-54
	42		Move file pointer	3-54
	43		Get file attribute	3-55
	56		Rename a file	3-55
	48		Allocate specified number of paragraphs memory	3-56
	49		Free allocated memory	3-56
	4A		Modify allocated block	3-56
4.	Host ESC Commands			4-58
	4.1.	General Control Commands		4-58
		17.	Get terminal ID (ESC R)	4-61
		This commcand can get terminal ID. The default terminal ID is "MR350"		4-61
		18.	Get terminal ID and version no (ESC v)	4-61
		This commcand can get terminal ID and version no. The default terminal ID is "MR350 V4.xx".
		.......................................................................................................................................		4-61
	4.2.	Configuration Commands		4-61
	4.3.	File Transfer Commands		4-63
	4.4.	Multipoint Protocol		4-63
	4.4.1.		Protocol Operation	4-65
	4.4.2.		Commands	4-66
		ESC 0 - Application data		4-66
		ESC A - Soft Reset, Restart, or Abort		4-67
		ESC B - Enable/disable the decoding of barcode symbologies:		4-67
		ESC C - Write communication configuration table to MR350MKII		4-67
		ESC D - Read directory of RAM disk to host		4-68
		ESC D/ROM - Read directory of Flash ROM to host		4-68
		ESC E - Erase a file from the MR350MKII directory		4-68
		ESC F - Disable UPS battery to supply power		4-68
		ESC G - Get MR350MKII's RAM size		4-68
		ESC G/ROM - Get MR350MKII's Flash ROM size		4-69
		ESC H - Hard Reset and initiate power on test		4-69
		ESC I - Get filename of current executing program		4-69
		ESC J - Check if file existed or not		4-69
		ESC K - Set keyboard locking		4-70
		ESC L - Transfer file to MR350MKII		4-70
		ESC M - Write date and time to MR350MKII		4-70
		ESC O - Set auto-execution program		4-70
		ESC P - Set supervisor password (maxi. 8 characters)		4-71
		ESC R - Terminal ID		4-71
		ESC T - Write terminal configuration table to MR350MKII		4-71
		ESC U - Transfer file from MR350MKII		4-71
		ESC V - Write device configuration table to MR350MKII		4-71
		ESC v - Get Terminal ID and version no		4-72
		ESC X - Start program execution		4-72
			1-4