4-78
THRESH = ‘1’ ,very high security
= ‘2’ ;high security
= ‘3’ ;medium security
= ‘4’ ;low security
= ‘5’ ;very low security
NAK means command format error or checksum error.
ESC $U Upload Template ()
The command uploads the specified template from MV1100 flash
memory to the MR350 reserved file $FP.UPL .
==> STX ESC $U xxxxxxxxxx.yyy CS1 CS2 ADDR
<== STX ESC $U RESULT CS1 CS2 ETX
or
<== NAK
xxxxxxxxxx ;template ID ( ‘1’ -- ‘4294967294’ )
yyy ;template index ( ‘0‘ -- ‘255’ )
RESULT = ‘0’ ;success
= ‘1’ ;fail
= ‘2’ ;busy
= ‘3’ ;timeout
NAK means command format error or checksum error.
For the host to upload the specified template on MV1100, it should
issue ESC $U command first to upload the template to the MR350
MKII reserved file $FP.UPL and then issue ESC U command to
upload file $FP.UPL if ESC $U command is successful.
ESC $V Get Version
The command gets the software version information from MV1100.
==> STX ESC $V CS1 CS2 ADDR
<== STX ESC $V RESULT < , Kx.xxx Ay.yyyy > CS1
CS2 ETX
or <== NAK
RESULT = ‘0’ ;success
= ‘1’ ;fail
= ‘2’ ;busy
= ‘3’ ;timeout