VQT3P35 53
SETUP
1Image stabilizer (page 86)
hCompensate for camera shake
during recording.
2Focus (page 87)
hAdjust the focus according to
the distance to the subject.
3Focus mode
4Metering mode
5ISO sensitivity (page88)
hThe indicated ISO value is the
standard output sensitivity.
6White balance (page 89)
7Remaining battery power
indication (page 133)
:During video recording, the
image stabilizer is always
active.
: Camera shake in the
captured photo is
corrected.
:Camera shake during video
and photo recording is
compensated for and
corrected.
:The image stabilizer is not
active.
*: The camera automatically
focuses on the subject with
a range of 10 cm (3.9”) to ∞
(normal).
-: The focus can be set
manually.
:The camera focuses on the
subject within a range of
1 cm (0.4”) to ∞ (macro).
:9-point range finder focus
:Spot focus
A focus mark ' appears in
the center of the LCD
monitor.
n: Multi-metering
W: Center-weighted light
measuring
Y: Spot light-measuring
A metering spot @ mark
appears in the center of the
LCD monitor.
=: Sensitivity is set
automatically
*: Sets sensitivity to ISO50
u: Sets sensitivity to ISO100
v: Sets sensitivity to ISO 200
w: Sets sensitivity to ISO 400
6: Sets sensitivity to ISO 800
-: Sets sensitivity to ISO 1600
z: Set sensitivity to ISO3200
>: White balance is
automatically adjusted
depending on the ambient
lighting (auto).
:For shooting in sunny
conditions (sunny).
o: For shooting in overcast
conditions (cloudy).
:For shooting under
incandescent lighting
(incandescent).
:For setting the most
accurate white balance
(white set).