Panasonic HX-WA10 owner manual About the scene mode function and focus setting, 184 VQT3P35, Off

IMPORTANT MESSAGES AND ALERTS

About the scene mode function and focus setting

i The scene mode changes to		when the focus is set to		or -.
i Even if the focus is set to	or -, it changes to *when the scene
mode is set to any setting other than			.

About the status indicator when charging the battery pack

When the status indicator is flashing fast or slow, it may indicate one of the following conditions.

Flashing at about 4-second intervals (2 seconds on, 2 seconds off): slower

i This may indicate that the battery has been fully discharged, or when the battery temperature is high or low. The battery can be charged, but in some cases it may take several hours to fully charge it.

i During normal charging, the status indicator flashes at about 2-second intervals. However, even in this case, depending on the ambient conditions, the status indicator may flash at 4-second intervals until the battery is fully charged.

Flashing at about 0.5-second intervals (0.25 seconds on, 0.25 seconds off): faster

i The battery pack cannot be charged. Remove the battery pack from the camera once and reinsert it, then begin charging it again.

i Check to see that there is no dust, grime or foreign matter adhering to the camera or battery, and make sure that the battery pack is correctly inserted. Turn off the camera before cleaning it of dust, grime or other foreign matter.

i The battery pack or the ambient temperature is very high or very low. Try charging the battery pack again after it has returned to a suitable temperature. If the battery pack still cannot be charged, it is possible that the camera, the battery pack or the AC adaptor may be defective.

Off:

i Charging is complete.

i If the status indicator turns off even though charging is not completed, it is possible that the camera, the battery pack or the AC adaptor may be defective.

184 VQT3P35