Panasonic HX-WA10 owner manual During charging

3 Use the USB cable (supplied) to connect the camera and the AC adaptor, and then connect the AC adaptor to a power outlet.

hUse only the supplied USB cable. Operation is not guaranteed if a different USB cable is used.

hThe AC adaptor is for this camera only. Do not use it with other devices.

hRecharging takes place only when the camera is turned off or is in the sleep mode (page 43). Recharging does not take place when the camera is in the recording mode or playback mode.

3 To power outlet

1 Open

2

To AC adaptor

AC adaptor

hDo not use any other AC adaptors except the supplied one. h Do not use any other USB cables except the supplied one.

<During charging...>

hThe status indicator flashes red at 0.5-second intervals if the battery pack is defective or is not installed correctly. Make sure that the battery pack is correctly installed.

hIf the battery pack still fails to recharge, it is possible that there is a

malfunction in the camera, the battery pack or the AC adaptor. In case the status indicator is flashing fast or slow, please see page 184.

hWhen charging is completed, the status indicator turns off. h The charging time is approx. 120 minutes.

Status indicator

SETUP

VQT3P35 37