IP8840 Broadworks IP Phone
User Guide
16 Dec. ‘08
08:30
Ring Type (1)
>*Set to Default
Ringer Off
Type 1
Type 2
Type 3
Type 4
Wave Rin
g
1
Pla
y
Next OK
08:30
Line 1 Configuration
1.Ring Type
>2.Delayed Ring Timer
Previous Next OK
08:30
Delayed Ring Timer (1)
0
ÅClear OK
o Select the ring type using the Next softkey. Press the
Play softkey to hear the selected tone. An asterisk, »,
displays in front of the current setting.
o Press the OK softkey to save your entry.
o Move to another parameter with the navigation buttons and
continue the session or press the Setting ( ) button to
exit the configuration session.
To set delayed ring for a line:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the
OK softkey.
o Dial 2, or move the cursor to 2.Ring Setting using the Previous-Next softkeys and press the OK
softkey.
o Dial the Line number plus one (2 for Line 1, 3 for Line 2,
etc.), or move the cursor to Line
n
Configuration using
the Previous-Next softkeys and press the OK softkey.
The value of
n
is the Line button number.
o Dial 2, or move the cursor to 2.Delayed Ring using the
Previous-Next softkeys and press the OK softkey. . Note
the line number is shown in parenthesis after “Delayed
Ring Timer”.
o Using the dial pad enter the desired delay up to 10
seconds in one-second increments, zero is no delay. The
backspace softkey will delete the previous character and
the Clear softkey deletes the entire entry.
o Press the OK softkey to save your entry.
o Move to another parameter with the navigation buttons and continue the session or press the
Setting ( ) button to exit the configuration session.
The IP Phone can be programmed not to ring when an incoming call is received.
To set the Ringer Off parameter:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the
OK softkey.