IP8840 Broadworks IP Phone
User Guide
24 Dec. ‘08
08:30
Paired Headset List
Wireless Headset(00:1A:22:16:78:34)
Connect
08:30
Headset is connected
08:30
Paired Headset List
*Wireless Headset(00:1A:12:34:56:78)
Next Delete
A
dd
5.10.2. Connect or Disconnect a Paired Headset
When one or more headsets are paired with the IP8840 phone, the headset must be connected,
(activated) prior to use. When it is desired to change the active headset, the presently active headset
must be disconnected (deactivated) prior to connecting the new headset. The following procedure
describes the steps required to connect or disconnect a headset that is already paired to the IP Phone.
To connect to a headset that is already paired or, to disconnect an active headset:
o Press the Settings ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys, and press the
OK softkey.
o Dial 11, or move the cursor to 11.Bluetooth using the Previous-Next softkeys, and press the OK
softkey.
o Dial 1, or move the cursor to 1.Headset Management
using the Previous-Next softkeys, and press the OK
softkey. This displays a list of previously paired headsets.
o Select a Bluetooth headset from the list of paired headsets
using the Next softkeys. An asterisk, », displays in front
of the current headset selection.
o Use the right navigation button to locate and select the
Connect softkey to activate the headset or the Disconn
softkey to deactivate the active headset. The LCD will
display the connected or disconnected message for about
3 seconds.
o Move to another parameter with the navigation buttons and
continue the session or press the Settings ( ) button to
exit the configuration session.
5.10.3. Deleting a Headset from the Paired List
A Bluetooth headset can be removed from the Paired list. This is useful when five headsets are already
paired and a new headset must be paired with your IP8840.
To remove a headset from the Paired list:
o Press the Settings ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys, and press the
OK softkey.