
3. Telephone
Display while viewing
LWhen the unit did not receive name information, the display will show “NO NAME
RCVD”.
LWhen no calls have been received, the display will show “NO CALLER DATA”.
To edit a telephone number for calling back
Press {*} repeatedly after step 2. Each time you press {*}, the telephone number will be changed as follows:
1.1 - Area code - Local telephone number (“1” added)
2.Local telephone number (area code omitted)
3.Area code - Local telephone number
4.1 - Local telephone number (“1” added and area code omitted)
5Press {STOP} to exit the program.
3.9.2Erasing specific caller information
1Press {CALLER ID SEARCH}.
2Press {A} or {B} repeatedly to display the desired entry.
3Press {<}.
LTo cancel erasing, press {STOP} 2 times.
4Press {SET}.
LTo erase other entries, repeat steps 2 to 4.
5Press {STOP} to exit the program.
To stop viewing
Press {STOP} after step 2.
3.8Printing the Caller ID
list
LKeep the front cover page open for button locations.
1Press {CALLER ID PRINT} to start printing. L The display will show “ALL ERASE OK?”
after printing.
2Press {STOP} to exit the program.
LTo erase all of the stored caller information, press {SET} instead of
{STOP}.
3.9Erasing caller information
LKeep the front cover page open for button locations.
3.9.1Erasing all caller information
1Press {MENU} repeatedly to display “CALLER SET UP”.
2Press {SET}.
3Press {SET}.
LTo cancel erasing, press {STOP}, then
{MENU}.
4Press {SET}.
3.10Storing caller information
Important:
LThis feature is not available in the following cases.
–The telephone number includes data other than numbers (i.e., * or #).
–The caller information does not include a telephone number.
LKeep the front cover page open for button locations.
1Press {CALLER ID SEARCH}.
2Press {A} or {B} repeatedly to display the desired entry.
3Press {DIRECTORY PROGRAM}.
4Select the station key or navigator directory.
For stations
1.Press the desired station key.
2.Press {SET}.
3.Press {SET}.
For stations
1.Press the desired station key.
2.Press {SET}.
For stations
1.Press {LOWER}, then press the desired station key.
2.Press {SET}.
For navigator directory:
1.Press {<} or {>}.
2.Press {SET}.
34