7. Programmable Features
“ON”: A sending report will be printed out after every transmission.
“OFF”: Sending reports will not be printed out.
Code #06: Changing the ring setting in FAX ONLY mode
FAX RING COUNT
RINGS=3 [±]
To change the number of rings before the unit answers a call in FAX ONLY mode.
You can select “1”, “2”, “3” (default), “4” or “5 EXT.TAM”.
Code #12: Enabling remote operation for an answering machine
REMOTE TAM ACT.
MODE=OFF [±]
If you are using the unit with an answering machine, activate this feature, and program the remote activation ID to enable remote operation of the answering machine.
1.Press {MENU}.
2.Press {#} then {1}{2}.
3.Press {A} or {B} repeatedly to select “ON”.
4.Press {SET}.
5.Enter your ID from 1 to 5 digits, using
{*} and {#}.
L The default ID is “11”.
6.Press {SET}.
7.Press {MENU}.
Code #13: Setting the dialing mode
DIALING MODE
MODE=TONE [±]
If you cannot dial, change this setting depending on your telephone line service.
“TONE” (default): For tone dial service.
“PULSE”: For rotary pulse dial service.
Code #16: Setting the recording paper size
PAPER SIZE
=LETTER [±]
“LETTER” (default): Letter size paper.
“LEGAL”: Legal size paper.
“A4”: A4 size paper.
Code #17: Setting the ringer pattern
RINGER PATTERN
MODE=A [±]
You can select “A” (default), “B” or “C”.
7.3 Advanced features
Code #22: Setting the journal report to print automatically
AUTO JOURNAL
MODE=ON [±]
“ON” (default): The unit will print a journal report automatically after every 30 new fax communications (page 37).
“OFF”: The unit will not print a journal report, but will keep a record of the last 30 fax communications.
Code #23: Sending documents overseas
OVERSEAS MODE
MODE=ERROR [±]
If you have difficulty sending an overseas fax, activate this feature before starting transmission.
LThis feature is not available for broadcast
transmission.
LThe calling charge may be higher as the transmission speed is slowed down.
“NEXT FAX”: This setting is effective only for the next attempted fax transmission. After transmission, the unit will return to the previous setting.
“ERROR” (default): When the previous fax transmission fails and you wish to
“OFF”: Deactivates this feature.
Code #25: Sending a fax at a specific time
DELAYED SEND
MODE=OFF [±]
This feature allows you to take advantage of low- cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time.
To send a document:
1.Insert the document.
2.Press {MENU}.
3.Press {#} then {2}{5}.
4.Press {A} or {B} repeatedly to select “ON”.
5.Press {SET}.
6.Enter the fax number.
7.Press {SET}.
8.Enter the transmission start time.
LPress {*} repeatedly to select “AM” or “PM”.
9.Press {SET}.
47
