1. Introduction and Installation
14 For assistance, please visit http://www.panasonic.com/help
3Before loading a stack of paper, fan the paper to
prevent paper jams.
4Load the paper, print-side up (1).
Important:
LPush and lock the plate (2) in the paper input
tray, if it is lifted.
LMake sure that the recording paper guides (1)
are at the paper size mark and the recording
paper is under the paper limit mark (2). The
paper should not be loaded over the snubbers
(3).
5Insert the paper input tray into the unit.
Note:
LIf the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
LIf the paper input tray does not close, the plate in the
paper input tray may be lifted. Push the paper and
make sure that the paper is laid flat in the paper input
tray.
Caution for the paper input tray
LDo not drop the paper input tray.
LHold the paper input tray with both hands when
removing or installing. The paper input tray
weighs approximately 2 kg (4.4 lb.) when the
recording paper is fully installed.
2
1
1
3
2
3
1
Approx. 2 kg (4.4 lb.)
FLB881-PFQX2732ZA-OI-en.book Page 14 Wednesday, July 18, 2007 11:22 PM