5. Copier
35
Note:
LYou can save the previous page layout setting
(feature #467 on page 57).
5.2.3 To make a poster size copy (Poster
feature) (Scanner glass only)
You can make copies divided in to 4 (2 × 2) or 9 (3
× 3) sections to make enlarged copies of the individual
sections. You can then glue them together to make a
poster.
1Set the original (page 17).
2Press {PAGE LAYOU T } repeatedly to select
POSTER. i {SET}
3Press {V} or {^} repeatedly to select 2 × 2 or 3
× 3. i {SET}
4If necessary, enter the number of copies (up to 99).
i {START}
5After you finish copying, press {STOP} to reset this
feature.
Note:
LYou can save the previous page layout setting
(feature #467 on page 57).
5.2.4 To copy several pages onto 1 page (N
in 1 feature)
You can save paper by copying 2, 4 or 8 pages onto 1
page. The documents will be reduced to fit the recording
paper.
1Set the original (page 17).
LTo make a portrait copy, set the original in portrait
direction. To make a landscape copy, set the
original in landscape direction.
2Press {PAG E LAYO UT} repeatedly to select N in
1. i {SET}
3Press {V} or {^} repeatedly to select the number of
original documents from 2 in 1, 4 in 1 or 8
in 1. i {SET}
4Press {V} or {^} repeatedly to select the layout from
PORTRAIT or LANDSCAPE. i {SET}
5If necessary, enter the number of copies (up to 99).
6When using the scanner glass:
1. {START}
LThe unit will scan 1 page.
2. Place the next document on the scanner glass
and press {SET}. Repeat this until all the
documents are scanned.
LThe unit will start copying.
LYou can press {START} anytime to start
copying.
When using the auto document feeder:
{START}
7After you finish copying, press {STOP} to reset this
feature.
8 in 1”“LANDSCAPE
PORTRAIT
Original document Page layout
Original document Page layout
2 in 1”“PORTRAIT
LANDSCAPE
4 in 1”“PORTRAIT
LANDSCAPE
FLB881-PFQX2732ZA-OI-en.book Page 35 Wednesday, July 18, 2007 11:22 PM