11. Help
68 For assistance, please visit http://www.panasonic.com/help

11.2 Error messages – Display

If the unit detects a problem, one or more of the following messages will appear on the display.
Display Cause & Solution
“CALL SERVICE”LThere is something wrong with the unit. Contact our service personnel.
“CARRIAGE ERROR”LThere is something wrong with the carriage sensor. Contact our service
personnel.
“CHANGE DRUM”LThere is something wrong with the drum unit. Replace the drum unit and the
toner cartridge.
“CHECK DOCUMENT”LThe document was not fed into the unit properly. Remove the document,
then press {STOP} to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers (page 86)
and try again.
“CHECK DRUM”LThe drum unit is not inserted properly. Re-insert it correctly (page 9).
“CHECK PICK UP
INPUT TRAY #1”
LRecording paper was not fed into the unit properly. Re-insert the recording
paper (page 80).
Note:
L“#1”: Paper input tray
L“#2”: Manual input tray
“CLOSE ADF COVER”LThe ADF cover is open. Close it.
“DIRECTORY FULL”LThere is no space to store new items in navigator directory. Erase
unnecessary items (page 39).
“DRUM LIFE LOW REPLACE
SOON”
LThe drum life is near its end. Replace the drum unit as soon as possible.
“FAX IN MEMORY”LThe unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
88.
LIf feature #442 is set to “ALWAYS” (page 56), check the connection between
the computer and the unit.
“KEEP COPYING”LCopying has stopped due to a lack of recording paper or misfeeding of
recording paper. See the other displayed message instructions to continue
copying.
“LOW TEMP.”LThe inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area. While the unit cannot be operated, the received
documents are temporarily stored into the memory, and will be printed out
automatically when the unit warms up.
“MEMORY FULL”LWhen performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
LWhen making a copy, the document being stored exceeded the memory
capacity of the unit. Press {STOP} to clear the message. Divide the
document into sections.
“MODEM ERROR”LThere is something wrong with the unit’s modem. Contact our service
personnel.
“NO FAX REPLY”LThe other party’s fax machine is busy or has run out of recording paper. Try
again.
FLB881-PFQX2732ZA-OI-en.book Page 68 Wednesday, July 18, 2007 11:22 PM