Panasonic KX-FLB881 6.1 Sending a fax manually

6. Fax
37
6FaxSending Faxes
6.1 Sending a fax manually
6.1.1 Using the scanner glass
By using the scanner glass, you can send a page from
booklets or small size paper that cannot be sent with the
auto document feeder.
1If the {FAX} light is OFF, turn it ON by pressing
{FAX}.
2Set the original (page 17).
3If necessary, change the resolution and contrast
according to the type of document.
LTo select the resolution, see page 37.
LTo select the contrast, see page 37.
4Dial the fax number.
LTo send a single page, skip to step 7.
LTo send multiple pages, go to the next step.
5Press {QUICK SCAN} to scan the document into
memory.
Example: PAGES=01 01%
STANDARD
u
SCAN:PRESS SET
SEND:PRESS START
6Place the next page on the scanner glass. i
{SET}
LTo send more pages, repeat this step.
7{START}
Note:
LTo stop sending, see page 65.
LYou can change the default operation mode (feature
#463 on page 52) and the timer before returning to
the default operation mode (feature #464 on page
53).
To select the resolution
1. {RESOLUTION}
2. Press {V} or {^} repeatedly to select the desired
resolution.
–“STANDARD”: For normal-sized characters.
–“FINE”: For small-sized characters.
–“SUPER FINE”: For very small-sized characters.
–“PHOTO”: For photographs, shaded drawings,
etc.
3. {SET}
LUsing the “FINE”, “SUPER FINE” and “PHOTO”
settings will increase transmission time.
To select the contrast
You can adjust this setting depending on the darkness or
lightness of the document. 5 levels (light to dark) are
available.
1. {CONTRAST}
2. Press {V} or {^} repeatedly to select the desired
contrast.
LTo make lighter, press {V}.
LTo make darker, press {^}.
3. {SET}
Note:
LYou can hold the previous contrast setting (feature
#462 on page 52).
To redial the last number
{REDIAL} i {START}
LIf the line is busy, the unit will automatically redial the
number.
Note:
LTo stop sending, see page 65.
Reserving the fax transmission (Dual Access)
You can reserve the fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
transmission.
2. Enter the fax number using the dial keypad, one-
touch dial or navigator directory.
3. When using the scanner glass, press {QUICK
SCAN}. The unit will scan 1 page. Place the next
document on the scanner glass and press {SET}.
Repeat this until all the documents are scanned, then
press {START}.
When using the auto document feeder, press
{START}.
LIf the document exceeds the memory capacity,
transmission will be canceled. You must send the
entire document manually.
{SET}{V}{^}
{RESOLUTION}
{QUICK SCAN}
{CONTRAST}
{FAX}{START}
{REDIAL}
FLB881-PFQX2732ZA-OI-en.book Page 37 Wednesday, July 18, 2007 11:22 PM