Operating the built-in answering device
Activating the answering device
1 Turn the 
(Auto answer) light on by pressing 
.
2 When receiving a call, a greeting message will be played and the unit will record a voice message.
●To record your own greeting message, see page 18.
Listening to recorded messages
When new messages are recorded, the 
(Auto answer) light will flash.
1 Press 
to listen to the recorded messages.
2 To erase the messages, press |
| (Set) within |
10 seconds after playing back. |
|
|
To save the messages, press |
| (Stop). |
|
Listening to all of the recorded messages
Press 
(Replay/Record).
While a message is played back, the following operations are available:
To listen to the next message, press
(right).
To listen to the previous message, press
(left).
To play back faster, press 
.
To play back slowly, press 
.
To erase the message being played back, press
.
To erase all the recorded messsages, press
.
To stop playing back, press |
| (Stop). |
|
Erasing all of the recorded messages
1 Press | (Menu) and | . |
2 Press | (Stop). |
|
Erasing your own greeting message
1 Press 
(Menu) and 
.
2 Press | (Stop). |
●The
Operating the answering device from a remote location
Preparation: Programming the remote operation ID
1.Press 
(Menu) and 
.
2.Enter any
or #.
3.Press 
(Set).
4.Press 
(Stop).
Operation: Listening to a recorded message from a remote location
Turn the 
(Auto answer) light on before you go out. Remote operations are available only from a touch tone telephone.
1.Call your unit.
2.Press ＃ during the greeting message, then enter the remote operation ID and ＃ .
3.Press 2 ＃ .
● The recorded messages will be played back.
19
