5. Copier
38
Example: 150 % enlarged copy
Using the scanner glass (1):
Using the automatic document feeder:
Example: 70 % reduced copy
Using the scanner glass (1):
Using the automatic document feeder:
5.2.2 Collate copy
The unit can collate multiple copies in the same order as
the original document pages.
1Set the original (page 19).
2Press {Collate} repeatedly to display ON.
3{Set}
4Enter the number of copies (up to 99 ).
5When using the scanner glass:
1. {Black}/{Color}
LThe unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}. Repeat this until all the
documents are scanned, then press
{Black}/{Color}.
LThe unit will start copying.
When using the automatic document feeder:
{Black}/{Color}
6After you finish copying, press {Stop} to reset this
feature.
Example: Making 2 copies of a 4-page original
document
Note:
LThe unit will store the documents into memory while
collating the copies. If memory becomes full while
storing, the unit will only print out the stored pages.
LYou can hold the previous collate setting (feature
#469 on page 64).
Proof set feature
To make 1 set of collate copy first, press {Collate}
repeatedly to display PROOF SET (step 2 on
“5.2.2 Collate copy”, page 38). The unit will make 1 set of
collate copy and stop temporarily so you can check
whether the copy is made as you expected. If the copy is
correct, press {Black}/{Color} to continue copying.
If the copy is not correct, press {Stop} and start again
from the beginning.
Original document Enlarged copy
Original document Enlarged copy
Original document Reduced copy
Original document Reduced copy
1
1
Collated pages Uncollated pages
4
3
2
1
4
3
2
1
4
4
3
3
2
2
1
1