9. Programmable Features
69
Registering the scan to e-mail
destinations (via e-mail
server) (LAN connection
only)
LThis feature can be
programmed only through
the web browser interface.
When you send scanned files via e-mail server, you can register e-mail
destinations (up to 300 destinations) for the unit through the web browser
interface in advance.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Device Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 58). i [OK]
4. Select the [SCAN FEATURE] tab.
5. Click [Edit] next to [SEND USER].
6. Click [Edit] next to the desired scan to e-mail user.
7. Enter name and e-mail address, then select the station key number from the
drop-down list if necessary. i [Submit]
8. Close the web browser.
Setting the information for
scan to FTP (LAN connection
only)
LThis feature can be
programmed only through
the web browser interface.
When you send scanned files to an FTP server, you can register FTP
destinations (up to 6 destinations) to the unit through the web browser interface
in advance.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Device Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 58). i [OK]
4. Select the [SCAN FEATURE] tab.
5. Click [Edit] next to [FTP SERVER].
6. Click [Edit] next to the desired FTP server destination.
7. Enter the server name, IP address, folder directory, etc. i [Submit]
8. Close the web browser.
Note:
LIf you do not enter the folder directory in step 7, the scanned image will be
saved in the root folder.
Feature/Code Selection