2. Preparation
25
For assistance, please visit http://www.panasonic.com/help
2.12.2 Installing Multi-Function Station on a computer
LInstall Multi-Function Station (CD-ROM) before
connecting the unit and a computer with USB
cable. If the unit is connected to a computer with
USB cable before installing Multi-Function
Station, the [Found New Hardware Wizard]
dialog box will appear. Click [Cancel] to close it.
LThe screenshots shown in these instructions are
for Windows XP and are included for reference
only.
LThe screenshots shown in these instructions
may differ slightly from those of the actual
product.
LSoftware features and appearance are subject to
change without notice.
LIf you are using KX-MB200/KX-MB700/KX-
FLB880 series, see page 93.
1Start Windows and exit all other applications.
LFor Windows 2000, Windows XP and Windows
Vista users, you must be logged in as an
administrator in order to install Multi-Function
Station.
2Insert the supplied CD-ROM into your CD-ROM
drive.
LIf the [Select Language] dialog box appears,
select the language that you want to use with this
software. Click [OK].
LIf the installation does not start automatically:
Click [Start]. Choose [Run...]. Type “D:\Install”
(where “D” is the drive letter of your CD-ROM
drive). Click [OK].
(If you are not sure what the drive letter is for your
CD-ROM drive, use Windows Explorer and look
for the CD-ROM drive.)
3[Easy Installation]
LThe installation will start automatically.
4When the setup program starts, follow the on-screen
instructions.
LReadiris OCR software (page 33) and Device
Monitor (page 75) will also be installed.
5The [Connect Type] dialog box appears.
For USB connection:
1. [Connect directly with a USB cable.] i [Next]
LThe [Connect Device] dialog box will appear.
2. Connect the unit and a computer with the USB cable
(1), then click [Next].
LIf the unit is connected to your computer, the
model name will be automatically detected.
LYou can change the name of the unit if necessary.
3. Click [Install], then follow the on-screen
instructions.
LThe files will be copied to your computer.
For LAN connection:
1. [Connect via the Network.] i [Next]
LThe [Select a Network Device] dialog box will
appear.
2. Check [Select in the searched list] and select the
unit from the list.
LIf the name of the desired unit is not displayed on
the list, and the IP address for the unit has been
assigned, check [Direct input] and enter the IP
address.
3. [Next]
LYou can change the name of the unit if necessary.
4. Click [Install], then follow the on-screen
instructions.
LThe files will be copied to your computer.
To view or install the operating instructions data
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
2. Click [Operating Instructions], then follow the on-
screen instructions to view or install the operating
instructions in PDF format.
Important notice
If you use Windows XP or Windows Vista, a message
may appear after connecting the unit with the USB
cable. This is normal and the software will not cause
any difficulties with your operating system. You can
continue the installation with no problem. This kind of
message is displayed:
LFor Windows XP users
“The software you are installing for this hardware
has not passed Windows Logo testing to verify its
compatibility with Windows XP.”
LFor Windows Vista users
“Would you like to install this device software?”
1