2. Preparation
19
For assistance, please visit http://www.panasonic.com/help
2.4 Selecting the operation mode (Scan/Copy/Fax)
You can select the desired mode by pressing one of the
following buttons.
{Scan}: Select this mode when using the unit as a
scanner (page 32).
{Copy}: Select this mode when using the unit as a
copier (page 36).
{Fax}: Select this mode when using the unit as a fax
machine (page 43).
Note:
LThe default operation mode is the copy mode.
LYou can change the default operation mode (feature
#463 on page 59) and the timer before returning to
the default operation mode (feature #464 on page
59).
Document Requirements
2.5 Setting the original

2.5.1 Using the scanner glass

1Open the document cover (1).
2Place the document FACE DOWN on the scanner
glass (2), aligning the top left of the document with
the corner to which the m mark points.
3Close the document cover.
Note:
LConfirm that there are no documents in the
automatic document feeder.
LPlace the original onto the scanner glass gently. Do
not press down too firmly to avoid malfunction.
LIf the original is a thick book, do not close the
document cover.
LCheck that any ink, paste or correction fluid has dried
completely.
LEffective scanning area is as follows:
Effective scanning area
LShaded area will be scanned.
2
1
208 mm
(8 3/16")
347
mm
(13 11/16")
4 mm
(5/32")
4 mm
(5/32")
4 mm
(5/32")
4 mm
(5/32")