Panasonic KX-TC1220NZW operating instructions For New Zealand Users

•To move the cursor, press (*) (←) or (#) (→).

•If a name is not required, press á (Next key) and go to step 5.

Press á (Next key).

Enter a phone number, up to 22 digits.

•If you misdial, press Ü. Digits are erased from the right.

Press á (Save key).

•A beep sounds.

•To continue storing other items, repeat from step 2.

•To return to the standby mode, press (EXIT/CH).

in the directory.

•The display shows the number of stored items

While the arrow points to “Save directory”, press á (Yes key).

1

2

3 Enter a name, up to 15 characters using the dialling buttons (p. 39).

Press (FUNCTION/EDIT).

Using the Directory

4

5

6

HSave directory Ringer volume

GF H=Yes

Directory= 20 items

Enter name

#=←→ H=Next

Enter name Tom Jones

#=←→ H=Next

Enter phone no.

03987654321

H=Save

Tom Jones 0987654321

•If a pause is required for dialling, press (REDIAL/PAUSE) to add a pause to a

phone number in step 5. This counts as one digit (p. 47).

•You can exit the programming mode any time by pressing (EXIT/CH).

•If the display shows “Memory is full” in step 2, press (EXIT/CH). To erase other stored items from the directory, see page 44.

•After the maximum of 30 items has been stored, “Memory is full” is also displayed.

For New Zealand Users:

Your telephone service provider may charge you for a local call when it is dialled with an area code prefix. If the charge for local call is unacceptable, only the 7-digits of the local number should be dialled from your telephone. Do not dial the “0” prefix or the area code digit.

38