Before Requesting Help | Panasonic KX-TC1220NZW instruction

Before Requesting Help

ProblemRemedy

(LOCATOR/INTERCOM) does •The handset is too far from the base unit.

not function.							•The handset is engaged in an outside
							call or viewing the Caller List. Wait until
							the IN USE/CHARGE indicator light
							goes out.

You cannot redial by							•If the last number dialled was more than
pressing (REDIAL/PAUSE).							32 digits long, the number will not be
							redialled correctly.
							•The button has a double function as
							either redial or pause. It will redial the
							last number dialled if pressed at the
							outset of a call (p. 21, 22, 24). If another
							number has been dialled ﬁrst, it will
							operate as a pause button (p. 47).

“Recharge” is displayed on •Charge the battery fully (p. 12).
the handset, “			” ﬂashes


or the unit beeps
intermittently.

You charged the battery							•Clean the charge contacts and charge
fully, but “Recharge” is still							again (p. 13).
displayed and/or “						”	•Install a new battery (p. 52).


continues to ﬂash.

The IN USE/CHARGE							•This is normal.
indicator light does not go
out after the battery has
been charged.

For Australian Customers

Panasonic Australia operates a toll free Customer Care Centre. Please phone Panasonic on 132600 for assistance.

For New Zealand Customers

Panasonic New Zealand operates a toll free Customer Support Centre.

Please phone 0800 Panasonic (0800 726276) for assistance.

56

Image 56

Panasonic KX-TC1220NZW operating instructions Before Requesting Help, For Australian Customers, For New Zealand Customers

Contents

Charge the battery for about 10 hours before initial use Operating Instructions For your future reference Accessories includedBefore Initial Use Base Unit Location Battery ChargeFor Best Performance Contents Transferring a Call Using the Intercom Call Waiting and Caller ID Compatible For Australia only Location of Controls Handset Base unit Display 0266667777 Preparation Display Settings Connections Installing the Battery in the Handset SettingsBattery strength Display prompt Battery strength Battery information After your Panasonic battery is fully charged pStandby mode While the handset is off the base unit Recharge You can select AM/PM or 24-hour clock by programming Time and Date AdjustmentMake sure the unit is in the standby mode initially For Caller ID service users p To check the time and date During programming Programmable FunctionsTo select the recall time p Setting the Auto Talk Feature Press Ö or Ñ repeatedly until the arrowPoints to Program Press á Yes key Selecting the Ringer Volume Programmable FunctionsWith the handset With the base unit Setting the LCD Contrast While the arrow points to LCDContrast, press á Yes key Press Ö or Ñ to select the desired Storing Your Area Code To store your area codeTo erase your area code For New Zealand Users Making Calls With the HandsetIf noise interferes with the conversation To redial the last number dialled on the handset Making Calls With the Base Unit Digital Duplex Speakerphone To adjust the speaker volume 8 levels while talking To redial the last number dialled on the base unitTo put a call on hold To release the hold Simultaneous Keypad Dialling Useful information Answering Calls Auto TalkIf the handset is off the base unit, press Talk Talk into the MIC Caller ID Service How caller information is displayed when a call is receivedHandset display shows Caller’s phone number after ﬁrst ring Caller ID Service To check the number of new callsWhile the handset is on the base unit While the handset is off the base unit Using the Caller List Viewing the Caller ListTo check who has called, follow the steps below To exit the list, press EXIT/CH Using the Caller List Ex. When you search from the most recent callTo return to the previous caller To exit the Caller List Calling Back from the Caller List Lift the handset off the base unit Editing the Caller’s Phone Number To add a numberTo erase the number Press FUNCTION/EDIT, then press Ü to erase the digit When the caller’s name is not displayed in the Caller List Storing Caller List Information in the Directory Erasing Caller List Information To erase a speciﬁc caller from the Caller List To erase all entries in the Caller List Speed Dialler Storing Phone Numbers in MemoryDialling a Stored Number To erase a stored number Using the Directory Storing Names and Numbers in the Directory For New Zealand Users Number of times key is pressed Keys Selecting Characters to Enter NamesIf you make a mistake while entering a name Eight times Using the DirectoryFor example, to enter Tom Jones Finding Items in the Directory To search for a name by initial Keys Index Dialling from the DirectoryIndex table Editing an Item in the Directory Press Ö or Ñ to select Clear Erasing an Item from the DirectoryDirectory item you want to erase Intercom Paging the base unit from the handsetPaging the handset from the base unit Handset locator Handset Press Intercom to answer Transferring a Call Using the Intercom IntercomFrom the handset to the base unit From the base unit to the handset For Analog PBX Line/Long Distance Service Users Special FeaturesHow to Use the Pause Button Automatic Security Code Setting Special FeaturesCall Waiting and Caller ID Compatible Recall Button Desired time is displayed Selecting the recall timePoints to Set recall Wall Mounting Tuck the telephone line cord insideWall mounting adaptor, then Push it in the direction of the arrow To charge the handset battery Wall Template Battery Replacement New battery for about 10 hours soThat the battery strength indicator appears p Close the cover. Make sure you charge Adding Another Phone ProblemRemedy Before Requesting Help Problem Remedy For New Zealand Customers Before Requesting HelpFor Australian Customers Safety Instructions SafetyInstallations Environment Placement For New Zealand Users Only Instructions to customer InstallationImportant Information For Australia only Service difficulties PQQX13215ZA-BM S1001-0