Panasonic KX-TC1220NZW Storing Your Area Code, To store your area code, To erase your area code

Programmable Functions

Storing Your Area Code

We recommend you program your area code before using the Caller ID feature (p. 27). Incoming calls from the same area will be then recorded in the Caller List without the area code. You do not have to remove the code before calling back or storing.

Make sure the unit is in the standby mode initially.

To store your area code

1	Press (FUNCTION/EDIT).
2	Press Ö or Ñ repeatedly until the arrow
	points to “Program”, and press á
	(Yes key).
3	Press Ö or Ñ repeatedly until the arrow
	points to “Set area code”.
4	Press á (Yes key).
	•If previously set, the current area code is
	displayed.
5	Enter your area code.
	•You can enter the number up to 8 digits.
	•If you enter a wrong number, press Ü.
	The digits are erased from the right.
6	Press á (Save key).
	•A beep sounds.

•To return to the standby mode, press (EXIT/CH).

HSave directory Ringer volume

GF H=Yes

HProgram

GF H=Yes

Talk switching HSet area code

GF H=Yes

Area code

Enter area code

Area code 09

H=Save

Area code 09

•You can exit the programming mode any time by pressing (EXIT/CH).

To erase your area code

Press (FUNCTION/EDIT) ➡ Ö or Ñ to select “Program” ➡ ➡ á (Yes key) ➡ Ö or Ñ to select “Set area code” ➡

➡á (Yes key) ➡ (*) ➡ á (Save key).

For New Zealand Users:

Your telephone company may charge you for a local call if the number dialled has the area code prefix included. If the charge for local call is unacceptable, store your area code as shown above before use, or only the 7-digits of the local number should be dialled from your telephone. Do not dial the “0” prefix or the area code digit.

20