Panasonic kX-TG2323C operating instructions Press and hold Handset Locator

TG2323C.fm Page 23 Friday, February 20, 2004 10:59 AM

Special Features

Re-registering the Handset Handset & Base Unit

If an alarm tone sounds when you press [C], [SP-PHONE]or [VOICE ENHANCER] even when using the handset near the base unit, the handset may have lost communication with the base unit. You need to re-register the handset to the base unit.

•Make sure the base unit is not being used.

•Have both the handset and base unit nearby during registration.

•Follow steps 1 and 2 listed below. You have about 1 minute to complete them.

1Base unit:

Press and hold [HANDSET LOCATOR].

•The CHARGE indicator flashes.

2Handset:

Press and hold [FLASH/CALL WAIT] until a beep sound.

•The VOICE ENHANCER indicator flashes.

•When registration is complete, a beep sounds from the handset and the indicator lights go out.

•Wait for 20 seconds after registration is complete while the handset establishes communication with the base unit.

•If the handset beeps 3 times in step 2, an error occurred. Try again from step 1.

•You can stop registration by pressing [OFF] on the handset, and pressing [HANDSET LOCATOR] on the base unit.

23

Telephone System