TG2323C.fm Page 34 Friday, February 20, 2004 10:59 AM

Troubleshooting

Telephone System

Problem

Cause & Remedy

An alarm tone sounds

when you press [C], [SP-PHONE]or [VOICE ENHANCER].

You are too far from the base unit. Walk closer to the base unit and try again.

Confirm the AC adaptor is plugged in.

Raise the base unit antenna.

If the above remedies do not solve the problem, the handset may have lost communication with the base unit. Register the handset again (p. 23)

Static, sound cuts in/out,

• Move the handset and base unit away

fades. Interference from

from other electrical appliances (p. 3).

other electrical units.

• Walk closer to the base unit.

 

• Raise the base unit antenna.

 

 

The handset does not ring.

• The ringer volume is turned off. Set to

 

high, medium, or low (p. 15).

You cannot program any function items.

Programming is not possible while the handset is being used.

Do not pause for over 60 seconds while programming.

Walk closer to the base unit.

While another user is listening to messages or the Answering System is handling a call, you cannot program. Try again later.

While programming, the

• A call is coming in. To answer the call,

handset starts to ring and

press [C] or [SP-PHONE]. Try again

the program stops.

from the beginning after hanging up.

 

 

You cannot redial.

• If the last number dialed was more than

 

48 digits long, the number will not be

 

redialed correctly.

 

 

You cannot make long

• Please make sure that you have long

distance calls.

distance service.

 

 

You cannot page the

• The handset is too far from the base unit

handset.

or is engaged in an outside call. Try

 

again later.

34

Page 34
Image 34
Panasonic kX-TG2323C operating instructions Troubleshooting, Telephone System, Problem Cause & Remedy