TG2323C.fm Page 18 Friday, February 20, 2004 10:59 AM
Preparing the Answering System
Number of Rings Handset
You can select the number of times the unit rings before the Answering System answers a call, from “2” to “7” or “Toll saver”*. The factory preset is “4”.
1Press [VOICE ENHANCER].
•The indicator flashes.
2Press [2].
•The current setting is displayed on the base unit.
3Select the number of rings by pressing [0] (Toll saver*), or [2] to [7].
•If [0] (Toll saver) is pressed, “
” is displayed.
4Press [VOICE ENHANCER].
•The handset beeps and the indicator light goes out.
*Toll saver
When you call the unit from a remote operation, the number of rings will tell you if there are any new messages. If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. To save the toll charges for the call, hang up immediately when you hear the 3rd ring. The 3rd ring indicates that there are no new messages.
Remote Code Handset
The remote code prevents unauthorized people from accessing your unit and listening to your messages from any touch tone phone (see “Remote Operation from a Touch Tone Phone” on page 28).
Choose any
The factory preset remote code is “11”. If you do not program your own remote code, you can use “11”.
1Press [VOICE ENHANCER].
•The indicator flashes.
2Press [1].
•The current remote code is displayed on the base unit.
3Enter a 2-digit remote code (00–99).
4Press [VOICE ENHANCER].
•The handset beeps and the indicator light goes out.
To confirm the remote code, repeat steps 1 and 2.
• The remote code is displayed. When finished, press [OFF].
18
