Panasonic kX-TG2323C Listening to Messages, To play back messages Base Unit, During playback

TG2323C.fm Page 26 Friday, February 20, 2004 10:59 AM

Listening to Messages

You can see the total number of recorded messages on the base unit display. If the NEW MESSAGE indicator flashes on the base unit, new messages have been recorded.

Voice Day/Time Stamp: During playback, the unit will announce the day and time when each message was recorded (p. 13).

To play back messages Base Unit

Press [MESSAGE].

NEW MESSAGE Indicator

• The unit announces the number of new messages and only new messages are played back.

•When you have no new messages, the unit announces “No new messages. All message playback”

and plays back all messages. [MESSAGE]

•When you have no messages, the unit announces “No messages”.

•During playback, the display shows the message number.

•At the end of the last message, “End of final message” is heard. The unit will announce the remaining recording time if it is less than 3 minutes.

•If a call is received during playback, the handset rings and playback stops. To answer the call, lift the handset, or press [C] or [SP-PHONE]if the handset is off the base unit. For playback, try again from the beginning after hanging up.

During playback	Base Unit
To adjust the	To increase volume, press [>].
speaker volume	To decrease volume, press [<].
To repeat a	Press [REPEAT].
message	• If pressed within the first 5 seconds of playback,
	the previous message will be played.
To skip a message	Press [SKIP].
To stop playback	Press [STOP].
	• To resume playback, press [MESSAGE].
	• If you do not press any buttons for 60 seconds
	or if you press [STOP] again, playback mode
	will be cancelled.

26