Panasonic KX-TG2344 Programmable Settings Date and Time Handset, For Caller ID service users p

Programmable Settings

Date and Time Handset

We recommend you set the date and time so that the unit will announce the day and time each message was recorded when you play back messages.

1Press [MENU].

2	Scroll to “Date and time” by pressing [d] or
		Date and time
	[B], then press Select.
		KBack dB SelectL
3	1 Enter 2 digits each for the month, day, and
		Date:12.31.2004
	year. (Ex. To set May 15, 2004, enter “05
		Time:12:00 AM
	15 04”.)	KAM/PM	SaveL

Example

2Enter 4 digits for the time (hour and minute). (Ex. To set 9:30, enter “0930”.)

•If you enter a wrong number, press [d] or [B] to move the cursor to the incorrect number. Enter the correct number.

Date:05.15.2004

Time:09:30 AM

KAM/PM SaveL

4Select “AM” or “PM” by pressing AM/PM.

Date:05.15.2004 Time:09:30 AM

KAM/PM SaveL

5Press Save.

•The date and time are set and “E” disappears from the base unit display.

•If the handset beeps 3 times, the date and time were not set correctly. Start again from step 3.

6Press [OFF].

•When entering the time in step 3, you cannot enter numbers greater than 12. Do not use military time. (To set 13:00 hours, enter “0100”, then select “PM” in step 4.)

The date and time may be incorrect after a power failure. When “E” flashes on the base unit display, set the date and time again.

To confirm the date and time, repeat steps 1 and 2 above.

•The current date and time are displayed. When finished, press [OFF].

For Caller ID service users (p. 27)

•When a call is received, Caller ID information adjust the date and time if the time is incorrect.

•Caller ID information will automatically adjust the date and time for daylight saving time.

•If the date and time have not previously been set, Caller ID information will not adjust the date and time.

14