Panasonic KX-TG2344 manual Direct commands, To turn on the Answering System, Skipping the greeting

Remote Operation from a Touch Tone Phone

Direct Remote Operation

Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu. To end remote operation, hang up at anytime.

Direct commands

[4]: Plays back new messages.

[5]: Plays back all messages.

[1]: Repeats the current message.

•If pressed within the first 5 seconds of playback, the previous message will be played.

[2]: Skips the current

message.

[9]: Stops the current

operation.

•To resume, enter a direct command within

15 seconds, or the voice menu will start (p. 57).

[*] [4] : Erases the current message.

•A short beep will sound and the next message will be played.

[*] [5] : Erases all messages.

•A long beep will sound and “No messages” will be heard.

[0]: Turns off the Answering System.

•The unit hangs up.

To turn on the Answering System:

Call your unit and wait for 15 rings.

•The unit will answer and the greeting will be played.

•The Answering System will be turned on. Hang up or enter the remote code for other options.

•When turning on the Answering System using a rotary or pulse service telephone, you cannot enter the remote code for other options.

Skipping the greeting

After calling your unit, press [*] during the greeting.

•The unit skips the rest of the greeting and you can start recording your message after the long beep.

58