Panasonic KX-TG2344 manual Number of Rings Handset, Select the recording time by pressing d or

Preparing the Answering System

5	Select the recording time by pressing [d] or
		Recording time
	[B].	:3min	dB SaveL
	• You can also select the recording time by pressing	KBack
	[1], [2], [3] or [0] (Greeting only).
6	Press Save, then press [OFF].

If you select “Greeting only”, the unit will answer calls with the greeting message, and then hang up. The unit will not record any incoming messages. The base unit will display “ ” instead of the number of messages.

Preparation

Number of Rings Handset

You can select the number of times the unit rings before the Answering System answers a call, from “2” to “7” or “Toll saver”*. The factory preset is “4”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.
		KBack dB SelectL
3	Press Select at “Set answering”.
		Set answering
		KBack dB SelectL

4 Press Select at “Number of rings”.

Number of rings

KBack dB SelectL

5Select the number of rings by pressing [d] or [B].

•You can also select the number of rings by pressing [0] (Toll saver*), or [2] to [7].

Number of rings :4

KBack dB SaveL

6Press Save, then press [OFF].

*Toll saver

When you call the unit from a remote operation, the number of rings will tell you if there are any new messages. If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. To save the toll charges for the call, hang up immediately when you hear the 3rd ring. The 3rd ring indicates that there are no new messages.

For assistance, please call: 1-800-211-PANA(7262)

21