![](/images/new-backgrounds/1222288/22228823x1.webp)
M A N U A L •T 6 0 F
S’
RE
NW
O
12
minute and turn the power switch on to reset the treadmill. This should clear incidental errors and ready the treadmill for normal operation again. If after you have reset the treadmill by turning the power switch off and on again, and the treadmill is still not operational, contact your local Tunturi dealer for service.
If you require spare parts, always give the model, serial number of your equipment and the spare part number for the part you need. The spare part list is at the back of this manual. Use only spare parts mentioned in the spare part list.
ERROR CODES
The user interface will display information about operational faults.
SYSTEM CHECK FAILED. Possible motor controller fault. Turn the power switch off, wait 1 minute and turn the power switch on again. If treadmill recovers to normal operation, you may continue to use the treadmill. Otherwise, call the dealer for service.
SPEED SENSOR ERROR. Call the dealer for service.
MOTOR SPEED ERROR. Ensure correct usage of the treadmill. Do not push the belt with your feet. Turn the power switch off, wait 1 minute and turn the power switch on again. If treadmill recovers to normal operation, you may continue to use the treadmill. Otherwise, call the dealer for service.
MOTOR OVERLOAD. Ensure correct usage of the treadmill. Do not brake the belt. Turn the power switch off, wait 1 minute and turn the power switch on again. If treadmill recovers to normal operation, you may continue to use the treadmill. Ensure the lubrication is sufficient,
LIFT MOTOR ERROR. Call the dealer for service.
LIFT MOTOR OVERLOAD. Ensure correct usage of the treadmill. Do not overload the lift motor by continuously changing the elevation. Turn the power switch off, wait 1 minute and turn the power switch on again. The lift motor will be automatically calibrated when the power switch is turned on. If treadmill recovers to normal operation, you may continue to use the treadmill. Otherwise, call the dealer for service.
MAINTENANCE CODE
CHECK LUBRICATION. Ensure the lubrication is sufficient,
MOVING AND STORAGE
The T60F can be folded up to space saving storage position. Always let the treadmill come to a complete stop before lifting the running deck into the storage position. Turn off the power switch and unplug the power cord from the wall and the treadmill. Take hold of the rear end of the running base and lift up until the
running base is locked in place. NOTE! The gas spring is designed to make lifting the running base easier. Always remember to ensure that the running base is locked
in the storage position. When in storage position, the treadmill will automatically rest on the transportation wheels. Push the equipment on the transportation wheels. To release the folding lock, press the left gas spring lightly with your foot on the sticker indicating the folding mechanism and pull the running base down. Lower the treadmill carefully onto the floor.
NOTE! Transport the treadmill with extreme caution over uneven surfaces, for example over a step. The treadmill should never be transported upstairs using the wheels over the steps, instead it must be carried. We recommend that you use a protective base when transporting the equipment. The running belt needs to be realigned and centered after moving.
To prevent malfunctioning of the treadmill, store it in a dry place with as little temperature variation as possible, protected against dust. Always unplug the treadmill from the electrical outlet when not in use.
TECHNICAL DATA
Length | 202 cm / 79“ |
(storage position | 115 cm / 45”) |
Height | 138 cm / 54” |
(storage position | 175 cm / 69”) |
Width | 94 cm / 37” |
Weight | 105 kg / 231 lbs |
Running surface | 54 x 138 cm |
Speed | |
Elevation range | |
Motor | 2,0 HP (1,49 kW) |
T60F treadmill meets the requirements of the EU’s EMC Directives on electromagnetic compatibility (EN
Due to our continuous policy of product development, Tunturi reserves the right to change specifications without notice.
CAUTION! The instructions must be followed carefully in the assembly, use and maintenance of your equipment. The warranty does not cover damage due to negligence of the assembly, adjustment and maintenance instructions described herein. Changes or modifications not expressly approved by Tunturi Oy Ltd will void the user’s authority to operate the equipment!