Preparation

Connections

Base unit

Raise the antennas.

Fasten the AC adaptor cord.

Hook

To power outlet (120 V AC, 60 Hz)

AC adaptor

To single-line telephone jack (RJ11C)

Telephone line cord

Charger unit (KX-TG5422 and KX-TG5423 only)

To power outlet (120 V AC, 60 Hz)

AC adaptor

Note:

LBase unit: Use only the included Panasonic AC adaptor PQLV1.

LCharger unit: Use only the included Panasonic AC adaptor KX-TCA1.

LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

LThe unit will not work during a power failure. We recommend connecting a standard telephone to the same telephone line or to the same telephone jack using the Panasonic KX-J66 T-adaptor. Emergency power can be supplied to the unit by connecting a Panasonic battery back-up power supply noted on page 5.

For assistance, please call 1-800-211-PANA (7262).

9

Page 9
Image 9
Panasonic KX-TG5421 operating instructions Connections, Base unit, Charger unit KX-TG5422 and KX-TG5423 only