Caller ID Service
–When the call is being received, the Caller ID number will be displayed in the same Format as the Edited Number.
–After the call is ended, the telephone
number of the caller, when reviewed from the Caller list, will be displayed in the same Format as the Edited Number.
For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an item in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically. This feature can be turned on or off (page xx).
Note:
LPhone numbers from the 4 most recently edited area codes are automatically edited.
LIf you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again.
Storing caller information into the handset phonebook
1 {CID} (left soft key)
2 Select the desired item.
LTo edit the number, press {EDIT}, then edit the number (see step 3 on page 38, “Editing a caller’s phone number before calling back”).
3 {SAVE}
4 Continue from step 3, “Editing items in the handset phonebook”, page 33.
Erasing selected caller information
1 {CID} (left soft key)
2 Select the desired item.
3 {ERASE} i“Yes” i{SELECT}
i{OFF}
Erasing all caller information
1 {CID} (left soft key)
2 {ERASE} i“Yes” i{SELECT}
39
