Panasonic KX-TG6541BX Changing the handset name, Call block Caller ID, Subscribers only

TG654xBX(e).book Page 26 Tuesday, June 28, 2011 10:16 AM

Programming

			phone number, the call is logged in the
Changing the handset name
			caller list (page 29) with $after the
Each handset can be given a			call is disconnected.
customized name (“Bob”, “Kitchen”,
etc.). This is useful when you make			Storing unwanted callers
intercom calls between handsets. You			You can store up to 30 phone numbers in
can also select whether or not the			the call block list by using the caller list or
handset name is displayed in standby			by entering the numbers directly.
mode. The default setting is “Off”. If			Important:
you select “On” without entering any			L You must store the phone number
handset name, “Handset 1” to			with an area code in the call block list.
“Handset 2” is displayed.			■ From the caller list:
1	{MENU} i{#}{1}{0}{4}
		1		{3} CID
2 Enter the desired name (max. 10
			2 {V}/{^}: Select the entry to be
	characters; see the character table,
				blocked.
	page 17).	3
				{SAVE}
	L If not required, go to step 3.
		4		{V}/{^}: “Call block” i
3	{SAVE}
				{SELECT}
4 {V}/{^}: Select the desired setting.		5
				{V}/{^}: “Yes” i{SELECT}
	i{SELECT}		6 Edit the phone number if
5	{SELECT} i{OFF}
		7		necessary (24 digits max.).
				{SAVE} i{OFF}
Call block (Caller ID
			■ By entering phone numbers:
subscribers only)
			1 {MENU} i{#}{2}{1}{7} i
This feature allows the unit to reject calls
				{ADD}
when:
			2 Enter the phone number (24
– the unit receives a call from a phone
				digits max.).
	number stored in the call block list as
				L To erase a digit, press
	unwanted (“Storing unwanted callers”,
				{CLEAR}.
	page 26).
		3		{SAVE} i{OFF}
– the unit receives a call without phone
	number (“Block calls without phone
			Block calls without phone number
	number”, page 26).
			You can reject a call without phone
When a call is received, the unit rings for
			number including “Out of area” or
a short time while the caller is being
identified. If the phone number matches			“Private caller”.
an entry in the call block list, the unit		1		{MENU} i{#}{2}{4}{0}
sends out a busy tone to the caller, and			2 {V}/{^}: Select the desired setting.
then disconnects the call.				i{SAVE} i{OFF}
Important:
			Viewing/editing/erasing call block
L When the unit receives a call from a
			numbers
	number that is stored in the call block
		1
	list or a call without a recognized			{MENU} i{#}{2}{1}{7}

26