Useful Information
47
Answering system
Liquid damage
Caution:
LTo avoid permanent damage, do not use a microwave oven to speed up the drying
process.
Problem Cause/solution
The unit does not record
new messages.
LThe answering system is turned off. Turn it on
(page 31).
LThe message memory is full. Erase unnecessary
messages (page 33).
LThe recording time is set to “Greeting only”.
Change the setting (page 36).
LIf you subscribe to a voice mail service, messages
are recorded by your service provider/telephone
company, not your telephone. Change the unit’s
number of rings setting or contact your service
provider/telephone company (page 36).
I cannot operate the
answering system.
LSomeone is using the unit. Wait for the other user
to finish.
LA caller is leaving a message. Wait for the caller to
finish.
LThe handset is too far from the base unit. Move
closer.
I cannot operate the
answering system
remotely.
LThe remote access code is not set. Set the remote
access code (page 34).
LYou are entering the wrong remote access code. If
you have forgotten your remote access code,
enter the remote access code setting to check
your current code (page 34).
LPress each key firmly.
LThe answering system is turned off. Turn it on
(page 35).
Problem Cause/solution
Liquid or other form of
moisture has entered the
handset/base unit.
LDisconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least 3
days. After the handset/base unit are completely
dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before
use. If the unit does not work properly, contact an
authorized service center.
TG654xBX(e).book Page 47 Tuesday, June 28, 2011 10:16 AM