4 | Check the envelopes. If the envelopes are curled, remove the curling. |
(☞ 60) If the curl cannot be removed completely, load the stack with |
the curl bending up as shown in the illustration. Make sure none of the flap of each envelope is not overlapping the envelope below.
Troubleshooting
5 | Insert the stack of envelopes into the sheet feeder with the top edge of |
the stack and flaps facing down. | |
6 | Check the paper output receiver. Make sure the setting for envelopes |
is selected. (☞ 63) |
Problem : Paper does not eject after printing.
1
2
To eject the last page, press the RESUME button.
Make sure your software application sends a form feed (FF) after every page. For details, refer to your software application manual.
Troubleshooting | 121 |
