To install the photo ink tanks

The ink tanks must be installed in the BJ Cartridges in the order described below. As you insert each ink tank, match its colour with the colour key above the cartridge holder.

1 Collect the three BCI-8P ink tanks.

Ink Tank BCI-8PC Photo Ink Tank BCI-8PBK Photo Ink Tank BCI-8PM Photo

2

Pick up the Ink Tank BCI-8PM (Magenta) and remove the shrink-wrap

and orange protective cap. Grip the end of the orange film strip and

pull it away to tear open the shrink-wrap. Make sure you remove all the shrink-wrap from the ink tank.

Do not remove this label!

While pressing on the orange protective cap , turn it in the direction of the arrow.

After you remove the protective cap, discard it immediately.

Printing on paper and other media

Printing on paper and other media

87

Page 92
Image 92
Canon BJC-8500 user manual To install the photo ink tanks, Do not remove this label