Canon BJC-8500 user manual After the protective caps have been removed

	After the protective caps have been removed:
	■ Install each tank as quickly as possible to prevent the ink from dry-
	ing out.
	■ Handle the BCI ink tanks carefully to prevent staining your hands
	or clothing.
	■ To prevent interference with the ink flow from the BCI ink tanks,
	never touch the open ink port of an ink tank.
	■ Discard the protective cap immediately and never attempt to reat-
	tach a cap after it has been removed.
	■ When you install each ink tank, match the ink tank colour with the
	colour key above the cartridge holder, and match the colour on the
	seal in the ink tank slot with the colour of the ink tank that you are
	installing.
3	Install the Ink Tank BCI-8PM Photo in the empty right slot of the BJ
	Cartridge. Gently lower the ink tank straight down into the right slot.

PUSH

PUSH

PUSH

4	Make sure the magenta ink tank is in the correct slot, then press down
	gently until you hear it click in place.
5	Insert the two remaining ink tanks.
	Pick up the Ink Tank BCI-8PBK (Black) and remove the shrink-wrap

and orange protective cap.Then insert it into the centre slot of the BJ Cartridge. Press down the ink tank until you hear it lock in place.

Pick up the Ink Tank BCJ-8PC Photo (Cyan) and remove the shrink- wrap and orange protective cap. Then insert it into the left slot of the BJ Cartridge. Press down the ink tank until you hear it lock in place.

PUSH

PUSH

PUSH

PUSH

PUSH

88 Canon BJC-8500 User’s Manual