Installing the paper output receiver
The paper output receiver is installed above the paper cassette on the front of the printer. The paper output receiver receives each printed sheet as it is ejected from the printer and holds it for a few seconds before the movable flaps gently let it down on top of the stack. This avoids staining between stacked sheets by allowing the sheet below to dry for a few seconds before the next sheet is stacked on top of it.
During a long print job, do not allow the printed sheets to stack high- er than 15 mm (about 1/2 inch), approximately 50 sheets of Plain Paper or 40 sheets of High Resolution Paper
Flaps
|
| Receiver paper guide |
|
1 | While holding the paper output receiver at a slight angle, insert it into | ||
the slot ① above the paper cassette and lower it ② gently as you slide | |||
it into the printer.
①
②
42 | Canon |
