4 | Check the leading edge of the stack inside the printer and make sure |
that it is below the three tabs at the mouth of the feed slot. If you see |
any sheets curling into the feed slot over these tabs, remove the stack and insert it again. If one or more sheets curl over these tabs, the paper will not feed correctly.
IncorrectCorrect
Yellow tab
①Check the paper limit mark and make sure the top of the stack is below this mark.
②Move the paper guide to the side of the stack until it is snug (not too tight).
■If the paper guide is too loose, this can cause paper jams, skewed feeds or
■If the paper guide is too tight, this can cause failures to feed, skewed feeds, or late feeds wherein the print head misses the top margin and prints directly on the bare platen.
③If you are loading long paper, pull up the paper rest.
③ | ① | Do not exceed the line! |
|
② 
Setting up and using the printer
Setting up and using the printer | 45 |
