4 Load the stack in the paper cassette.
①Position the stack with the print side down between the paper guides and press down on the leading edge of the stack.
②Make sure the corners of the leading edge of the stack are below the tabs on the left and right.
③Check the paper limit mark on the inside of the paper guides and make sure the top of the stack is below this mark.
②
①
③
④Move the horizontal paper guide to the side of the stack until it is snug (not to tight).
⑤Press down on the stack to confirm that it bounces smoothly up and down. If the stack does not move smoothly, loosen the hori- zontal paper guide on the side.
⑥Check the tabs again to make sure that the corners of the stack are still below the tabs.
⑥
④ | ⑤ |
|
Vertical paper guide
Horizontal paper guide
40 | Canon |
