Printing on Plain Paper and Bubble Jet Paper
Plain Paper (64~90 gsm) or Bubble Jet Paper
To load Plain Paper or Bubble Jet Paper in the paper cassette
1 | Load a stack of paper in the paper cassette. (☞ 37) |
|
| ■ The paper cassette can hold up to 250 sheets of Plain Paper or |
|
| Bubble Jet Paper. |
|
| ■ Printing can be performed on either side of this paper so load either |
|
| side up or down. |
|
2 | To avoid paper jams, make sure the front edge of the stack is below the |
|
tabs. |
| |
3 | Make sure the paper guide is snug (not too tight) against the left side |
|
of the stack. |
| |
4 | Make sure the paper output receiver paper guide is set to the correct |
|
mark for the paper size you are using. |
| |
5 | Check the printer driver settings for this media (Print Mode, Paper |
|
Size, etc.). If you are using Windows, refer to the Windows Print Guide |
| |
| for details. If you are using a Macintosh computer, refer to the |
|
| Macintosh Print Guide for details. |
|
| During a long print job, do not allow the printed sheets to stack high- |
|
| er than 15 mm (about 1/2 inch or approximately 50 sheets). |
|
To load Plain Paper or Bubble Jet Paper in the sheet feeder |
| |
1 | Load a stack of paper in the sheet feeder. (☞ 44) |
|
| ■ The sheet feeder can hold up to 100 sheets of Plain Paper or Bubble |
|
| Jet Paper. | otherandmedia |
| Printingon paper | |
| ■ Printing can be performed on either side of this paper so load either |
|
side up or down.
Printing on paper and other media | 59 |
