
Push the paper output receiver into the printer until it locks in place. Make sure the paper output receiver is inserted completely inside the printer.
2 Adjust the receiver paper guide.
Move the paper guide ① on the paper output receiver to the correct mark ② for the width of the paper loaded in the paper cassette.
Before you start a print job, always set the paper output receiver paper guide to the correct mark for the size of the paper you are using. If you are using 13 x 19 in. size (Tableid+) paper, set the paper guide to the B+ mark.
Pull out the paper output tray extension ②.
①
②
Setting up and using the printer
3 | Check both the paper output receiver and the paper cassette and make |
sure that they are inserted completely into the printer. |
Now you are ready to load the sheet feeder.
Setting up and using the printer | 43 |