TG654xBX(e).book Page 25 Tuesday, June 28, 2011 10:16 AM
Programming
Special programming
Alarm
An alarm sounds at the set time for 3 minutes once or daily. Alarm can be set for each handset.
Important:
L Set the date and time beforehand (page 12).
1{MENU} i{#}{7}{2}{0}
2{V}/{^}: Select the desired alarm option. i{SELECT}
Off | Turns alarm off. Go |
| to step 6. |
Once | An alarm sounds |
| once at the set |
| time. |
Daily | An alarm sounds |
| daily at the set |
| time. Go to step 4. |
3Enter the desired date and month. i{OK}
4Set the desired time. i{OK}
5{V}/{^}: Select the desired alarm tone. i{SELECT}
L We recommend selecting a different ringer tone from the one used for outside calls.
6{SELECT} i{OFF}
L When the alarm is set, Eis displayed.
Note:
L To stop the alarm, press any dial key or place the handset on the base unit or charger.
L When the handset is in use, the alarm will not sound until the handset is in standby mode.
Night mode
Night mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Night mode can be set for each handset.
Important:
L Set the date and time beforehand (page 12).
L We recommend turning the base unit ringer off (page 14) in addition to turning the night mode on.
L If you have set the alarm, the alarm sounds even if the night mode is turned on.
Turning night mode on/off
1{MENU} i{#}{2}{3}{8}
2{V}/{^}: Select “On” or “Off”. i
{SAVE}
L If you select “Off”, press {OFF} to exit.
3Enter the desired hour and minute you wish to start this feature. i
{OK}
4Enter the desired hour and minute you wish to end this feature.
5{SAVE} i{OFF}
L When the night mode is set, 3is displayed.
Note:
LTo correct a digit, press {3} or {4} to move the cursor to the digit, then make the correction.
Changing the start and end time
1{MENU} i{#}{2}{3}{7}
2Continue from step 3, “Turning night mode on/off”, page 25.
25
