Preparation
12 For assistance, please visit http://www.panasonic.com/phonehelp
Setting up the handset

Connecting the charger

(KX-TG6702 only)

LUse only the included Panasonic AC
adaptor PQLV207.
Note:
LThe AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
LThe AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.

Battery installation/replacement

1Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
LIf necessary, remove the old battery.
2Insert the battery (A), and press it
down until it snaps into position (B).
Then close the handset cover (C, D).
Important:
LUse only the rechargeable Panasonic
battery noted on page 5.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Fasten the AC adaptor cord to prevent
it from being disconnected.
(120 V AC, 60 Hz)
Bottom of
the charger Hooks
A
B
C
D
TG6700.book Page 12 Monday, April 24, 2006 10:28 AM