Programming
L The numbers of all handsets registered to the base unit are displayed.
4Select the handset(s) you want to cancel by pressing the desired handset number. i M
L The selected handset number(s) flashes.
L To cancel a selected handset number, press the number again. The number stops flashing.
5{V}/{^}: “Yes” i M
L A confirmation tone sounds as each handset number disappears.
L The handset does not beep when cancelling its own registration.
6{ih}
Cancelling a base unit
A handset can cancel a base unit that it is registered to. This allows the base unit to end its wireless connection with the system.
1K (centre of joystick) i N i
M
2{V}/{^}: “Registration” i
M
3{3}{3}{5}
4{V}/{^}: “Cancel Base” i M
5Select the base unit(s) you want to cancel by pressing the desired base unit number. i M
L The selected base unit number(s) flashes.
L To cancel a selected base unit number, press the number again. The number stops flashing.
6{V}/{^}: “Yes” iM i{ih}
Note:
L To register a handset to another base unit or to the same base unit again, see page 29.
Increasing the range of the base unit
You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 3. Contact your Panasonic dealer for details.
Important:
L Before registering the repeater to this base unit, you must turn the repeater mode on.
L Do not use more than one repeater at a time.
Setting the repeater mode
1K (centre of joystick) i ! i
M
2{V}/{^}: “Repeater Mode” i
M
3{V}/{^}: Select the desired setting. i M i {ih}
Note:
L After turning the repeater mode on or off, w flashes on the handset momentarily. This is normal and the handset can be used once w stops flashing.
30
