Panasonic KX-TG8301NZ Selecting area codes to be deleted automatically, Setting call restriction

Programming

6{ih}

Selecting area codes to be deleted automatically

In some situations, phone numbers stored automatically in the caller list (page 32) will include area codes. If you do not want to dial the area codes when making calls from the caller list, you can store the area codes which you want the unit to delete automatically.

Example: You have stored the area code “09”. If you make a call from the caller list to the phone number “09-456- 7890”, the unit dials “456-7890”.

1K (centre of joystick) i ! i

M

2{V}/{^}: “Area Code” i M

3Enter an area code (5 digits max.). i M i {ih}

Note:

L The use of this feature can prevent a National Call from being dialled. E.g., in the case of the South Island, the “03” will be omitted and will therefore prevent a National Call to other areas of the South Island.

Setting call restriction

You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets are to be restricted. Storing area codes here prevents the restricted handsets from dialling any phone number in that area code.

1K (centre of joystick) i ! i

M

2{V}/{^}: “Call Restrict” i

M

3Enter the base unit PIN (default: “0000”).

L If you forget your PIN, contact your nearest Panasonic service centre.

4Set which handsets to be restricted by pressing the desired handset number.

L All the registered handset numbers are displayed.

L Flashing numbers indicate call restriction is turned on for the corresponding handset.

L To turn call restriction off for a handset, press the number again. The number stops flashing.

5M

6{V}/{^}: Select a memory location. i M

7Enter the phone number or area

code to be restricted (8 digits max.). i M i {ih}

L To erase a restricted number, press {C/T}.

Changing the base unit PIN (Personal Identification Number)

Important:

L If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, contact your nearest Panasonic service centre.

1K (centre of joystick) i ! i

M

2{V}/{^}: “Base Unit PIN” i

M

3Enter the current 4-digit base unit PIN (default: “0000”).

4Enter the new 4-digit base unit PIN. i M i {ih}

27