5. You￿￿will￿￿￿￿now￿￿￿￿￿￿￿￿￿see￿￿￿￿￿your phone’s IP Address.

￿￿￿￿

Accessing the Aastra Web UI

Aastra Web UI

1.Open your web browser and enter the phone’s IP address or host name into the address field.

2.At the prompt, enter your user- name and password and click .

Note: For a user, the default user name is “user” and the password field is left blank.

The Network Status window dis- plays for the IP phone you are accessing.

3.You can logout of the Aastra Web UI at any time by clicking

LOGOFF.

The following categories display in the side menu of the Aastra Web

UI: Status, Operation, Basic Settings.

Status

The Status section displays the network status and the MAC address of the IP phone. It also displays hardware and firmware information about the IP phone. The information in the Network Status window is read-only.

Operation

The Operation section provides the following options:

-User Password - Allows you to change user password

-Softkeys and XML - Allows you to set up to 20 softkeys for a specific function (line, do not disturb (DND), speeddial, busy lamp field (BLF), BLF list, XML, flash, park, pickup, or empty.

--Handset Keys - Allows you to configure up to 15 softkeys on the handset.

Directory - Allows you to copy the Callers List and Directory List from your IP phone to your PC.

-Reset - Allows you to restart the IP phone when required.

Basic Settings

The Basic Settings section provides the following options:

-Preferences - Allows you to set park/pickup call settings, enable/disable call waiting tone and stuttered dial tone, suppress DTMF playback, set incoming intercom call settings, and set ring tones.

-Call Forward - Allows you to set a phone number destination for where you want calls forwarded. You can configure call forward on a global or per-line basis.

Customizing Your 480i CT Base Station

4/IP Phone User Guide

Page 10
Image 10
Aastra Telecom 480I CT manual Accessing the Aastra Web UI, UI Status, Operation, Basic Settings