Introduction

This guide compliments the Aastra Model 480i CT Installation Guide that is included with the phone. Please refer to the installation guide for information on hardware requirements, features and physical set up of your new 480i CT.

Software Prerequisites

Permission to register at the IP PBX

Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), or Hypertext Transfer Protocol (HTTP) server

Phone Features

A 3.5" x 2.25" backlit display on main unit

Handset with 1 1/4" x 3/4" back- lit display and a handset base.

6 multi-functional softkeys - as default or customized settings

4 line/call appearance buttons with corresponding lights.

Up to 5 additional line/call appearances as softkeys.

Enhanced busy lamp fields.

Full-duplex speakerphone for handsfree.

Built-in-two-port, 10/100 Ether- net switch which lets you share a connection with your com- puter.

Inline power support, which eliminates power adapters.

General Requirements

A SIP-based IP PBX system or network installed and running with a number created for the new 480i IP phone.

Adherence to SIP standard RFC 3261.

Access to a configuration server where you can store the firm- ware image and configuration files.

The configuration server must be able to accept connections anonymously (if TFTP is used).

The IP phone must be config- ured for a specific type of proto- col to use. (TFTP is enabled by default). You can configure the following protocols on the IP phone:

-TFTP (Trivial File Transfer Protocol)

-FTP (File Transfer Protocol)

-HTTP (Hypertext Transfer Protocol)

A 802.3 Ethernet/Fast Ethernet

LAN

Category 5/5e straight through cabling

Power over Ethernet (PoE) power supply (optional acces- sory – necessary only if no inline power is provided on the net- work).

Introduction

2/IP Phone User Guide

Page 8
Image 8
Aastra Telecom 480I CT manual Introduction, Phone Features, General Requirements