Configuring Park /Pickup using Static Configuration
Use the following procedure to configure the Park/Pickup call feature using the static configuration method.
Note: Aastra recommends you configure either the static or the programmable configuration, but not both.
Aastra Web UI
1.Click on Basic Settings-> Preferences->General.
2.Enter a server value in the Park Call field to which incoming live calls will be parked.
Note: For values to enter in this field, see the table "Park/Pickup Call Server Configuration Values" on page 21.
3.Enter a server value in the "Pickup Parked Call" field.
Note: For values to enter in this field, see the table "Park/Pickup Call Server Configuration Values" on page 21.
4. Click | to save your |
changes. |
|
5.Click on Operation->Reset.
6.In the "Restart Phone" field
click 
to restart the IP phone.
Park/Pickup Programmable Configuration
The programmable method of configuration creates park and pickup softkeys keys that you can configure on the 480i CT phone.
You can set a softkey as "Park" or "Pickup" and then:
•specify a customized label to display on the Phone UI
•specify a value
•specify which line to use
•specify the state of the park and/ or pickup keys
On the IP phone UI, the Park/ Pickup feature displays the following:
•When a call comes in, and you pickup the handset, the custom label that you configured for the Park softkey displays on the Phone UI.
•After the call is parked, the label that you configured for the Pickup softkey displays on other phones in the network. You can then press the "Pickup" softkey, followed by the applicable value to pickup the call on another phone in your network.
On the 480i CT, the customized labels apply to the base unit only. On the 480i CT handset, pressing Ï displays the default labels of "Park" and "Pickup".
Notes:
1.On the 480i CT, the customized labels apply to the base unit only. On the 480i CT handset, pressing Ï displays the default labels of "Park" and "Pickup".
2.On the 480i CT, the old softkey labeled "Pickup" has been renamed to "Answer". This softkey uses the old functionality - when you pickup the handset, you see a softkey labeled "Answer". You can then press this key to pick up an incoming call. Do no confuse this feature with the new Park/Pickup configuration feature.
Handling Calls from the 480i CT Base Station
22/IP Phone User Guide
