Pairing and Unpairing Cordless Handset to Base
Pairing Handset
All handsets must be paired to a Base Station. This is performed from both the base and the cordless handset. Successful pairing will add the handset name to the handset list on the base and synchronize the handset list from the base to the newly paired handset. A total of 4 handsets can be paired to a single 480i CT base.
Note: When performing the handset pairing, it is recommended that thehandset be within 3 feet of the 480i CT base.
1.On the 480i CT base press %.
2.Select 11.Handset Pairing
Options List
9.SIP Settings 
10.Phone Status 
11.Handset Pairing
Show
Done
3.Select Pair
Options List
Pair
Remove
Show
Select Cancel
Done
Note: If there are already 4 handsets paired to the base, you will not be able to select the Pair option.
4.On the 480i CT cordless handset press Â.
5.Select 7- Hset pairing
7 - Hset pairing
= Scroll Pair
Note: If the handset has already been
paired, the softkey will be labelled as Remove instead of Pair.
Ensure the handset being paired is within close proximity to the base. It is recommended that the handset be within 3 feet from the 480i CT base.
Note: It is recommended that both steps 6 and 7 be executed at the same time.
6.On the 480i CT base, select Done.
Options List
Attempting to pair...
Cancel
Done
7.On the 480i CT cordless handset, press the softkey for Pair.
Attempting to
pair...
Cancel
Pairing and Unpairing Cordless Handset to Base
52/IP Phone User Guide
